(a) Traffic Control Signs; Street Name Signs. The Subdivider, Certified Survey Map or Condominium Developer (as applicable) shall install at his/her cost traffic control and street name signs along all streets proposed to be dedicated to the public. Traffic control and street name signs shall meet the following standards:
(1) Traffic Control Signs.
a. The design and placement of traffic control signs shall follow state regulations.
b. Such signing shall include street name signs and such temporary barricades and "road closed" signs as may be required by the Public Works Department until the street improvements have been accepted by Village Board resolution.
c. The Public Works Department shall have the authority to impose any restrictions to traffic on street improvements not yet accepted by the Village as he/she may deem necessary to protect the improvements from damage and to protect the safety of the public. Such restrictions shall include, but not be limited by enumeration to, weight restrictions, street closings, access restrictions, or the posting of temporary traffic control measures.
(2) Street Name Signs.
The Subdivision, Condominium or Certified Survey Map Developer (as applicable) shall install at least two (2) street name signs, of a design and color as approved by the Village, at each four-way street intersection proposed to be dedicated and one (1) at each "T" intersection. Street name signs shall be installed so as to be free of visual obstructions.
(b) Street Lights. The Subdivision, or Condominium or Certified Survey Map Developer (as applicable) shall install street lights along all streets proposed to be dedicated to the public. Said street lights shall meet the following standards:
(1) Pole and Luminaire Design.
The design of the street lights shall be compatible with the neighborhood and type of development proposed. Street light pole and luminaire design meet the requirements set forth in Village ordinances and as approved by the Village Engineer.
(2) Distribution and Placement.
Street lights shall be placed at each street intersection and at each interior block location and other spacing as required by the Village Engineer.
(3) Requirements of Village Lighting Ordinance.
All street lights shall be in full compliance with the Village of Edgar Outdoor Lighting Ordinance (if enacted). In addition:
a. All outdoor lighting luminaires shall be shielded in such a manner so that light emitted (either directly from the lamp or indirectly from the luminaire) is projected a minimum of fifteen (15) degrees below the horizontal plane running through the lowest point on the luminaire where light is emitted.
b. Mercury vapor outdoor lighting luminaires shall not be allowed.