All lots in the nonresidential districts shall conform to the requirements of Table 5.37. The requirements in footnotes are an integral part of this article and shall apply in all instances.
Table 5.37 Dimensional Requirements: C-1 Commercial District | |||
Requirement | C-1 | ||
Table 5.37 Dimensional Requirements: C-1 Commercial District | |||
Requirement | C-1 | ||
Minimum area per unit (sq. ft.) | 0 | ||
Minimum lot width (ft.) | 0 | ||
Minimum yard setback (ft.) | Front | 0 1 | |
Side | Adjoining C-1 or MFR | 0 | |
Adjoining R-1, R-2 or R-3 | 7 | ||
Adjoining a street | 0 | ||
Rear 2 | Adjoining C-1 | 0 | |
Adjoining Residential | 24 | ||
Maximum building height | Feet | 40 | |
Stories | 3 | ||
Maximum lot coverage | N/A | ||
1. Buildings shall be located at the right-of-way line; provided, the Planning Commission (and if applicable, the City Commission) may approve a site plan for a commercial building in the C-1 District that is set back no more than 15 feet from the right-of-way line, if one or more of the following conditions is present: A. The proposed building or addition is in line with a setback established by existing buildings located on either side of the subject property; B. The setback is necessary to provide for clear vision around corners or at driveway entrances; or C. The proposed use is a restaurant that will provide outdoor seating in the front yard. 2. Where an alley separates the C-1 District from property in a residential district, the full alley width may be counted as part of the required rear yard. | |||
(Ord. effective 11-29-2013; Ord. effective 10-1-2021; Ord. effective 5-13-2022)