§ 157.066 M-1, LIMITED MANUFACTURING DISTRICT.
   (A)   General requirements.
      (1)   Lot area is to be not less than 18,000 square feet.
      (2)   Lot width is to be not less than 100 feet.
      (3)   Floor area is to be not less than 5,000 square feet.
      (4)   Floor area ratio is not to exceed one and one-half.
      (5)   Building height is not to exceed 35 feet.
      (6)   Yards:
         (a)   Front yard is to be not less than 40 feet in depth.
         (b)   Side yards shall not be less than 25 feet in width, except a side yard abutting a street shall not be less than 40 feet in width.
         (c)   Rear yard is to be not less than 40 feet in depth, except a rear yard abutting an alley or railroad right-of-way may be reduced to 20 feet in depth.
      (7)   No dwelling units will be allowed, except for owner or caretaker.
      (8)   Signs shall be subject to regulations contained in Chapter 156 of this code of ordinances.
   (B)   Permitted uses. See § 157.065(A).
   (C)   Special uses. See § 157.065(A).
(1981 Code, Art. IX, B) (Ord. passed 12- -1986; Am. Ord. 90-10, passed 10-15-1990; Am. Ord. 98-10, passed 5-4-1998; Am. Ord. 99-24, passed - -1999; Am. Ord. 06-14, passed 5-15-2006; Am. Ord. 11-25, passed 4-18-2011; Am. Ord. 13-11, passed 4-1-2013)