Sec. 10-113 Table 1-Design Standards-Streets.

   Street Design

   Standards                                       Table 1

   Type of Street                                    Design Standards

Arterial, Primary & Secondary Thoroughfares               Plans, profiles and

                                                cross-sections based

                                                upon Major

                                                Thoroughfare Plan or

                                                as determined by the

                                                Commission

   Development Density

                                    Low      Medium   High

Residential Collector

                                       Low      Medium      High

Minor Residential

   Type of Curb (V=Vertical Face)               V         V         V

Type of Curb                              R         R/V      V

                                       V=Vertical Face

                                       R=Roll Type

                                       Sidewalk Width (ft.)*   0/455

   Maximum Grade                           8%         8%         8%

   Minimum Grade                           0.5%      0.5%      0.5%

   Marginal Access Street (R.O.W. ft.)**            40         40/50      50/60

   Marginal Access Pavement Width (ft.)            20         22/26      32/36

*   Installation of sidewalks on both sides of the street shall be required. Sidewalks shall run from curb to curb. The commission may waive this requirement along strictly rural streets, or where non-residential use makes a walk unnecessary, or for such other reasons as it deems appropriate. Sidewalks shall conform to Town specifications.

**   Curb and gutter shall generally not be required on the highway side. A planting strip with a minimum of ten (10) feet may be required on the highway side.

NOTE:   Pavement widths are measured from back of curb to back of curb. (Ord. No. 791 Appendix, 6-8-71)