Skip to code content (skip section selection)
Compare to:
Sec. 7-76 Inspection and Reinspection Procedures.
   (a)   After the issuance of any building permit, the Building Commissioner shall make, or shall cause to be made, inspections of the work being done as are necessary to insure full compliance with the provisions of the Article and the terms of the permit. The permit holder shall call for each inspection. The inspector shall have forty-eight (48) hours (exclusive of weekends and/or holidays) from time of notification to make the requested inspection. Reinspection of work found to be incomplete or not ready for inspection are subject to assessment of reinspection fees as prescribed in the Code.
   (b)   Upon completion of the Project and prior to any request for any final inspection, an as-built Plat of Survey shall be submitted with the as-built elevations of the lot corners as well as the as-built elevations of the structure corners. These elevations shall be in conformance with the development’s approved grading plan.
(Am. Ord. No. 2002-11, 4-16-01)