§ 153.037 RMM DISTRICT (RESIDENTIAL; MULTI-SECTIONAL MANUFACTURED HOMES).

   Permitted uses for RMM (Residential; Single Family; site-built, factory built and Multi-Sectional Manufactured Homes, no single-wide manufactured homes or mobile homes) are as follows in this section.

   (A)   Where no zoning/density district has been combined, then all provisions of Density District 10 shall prevail (see § 153.069, most common ones shown in chart below).

   (B)   (1)   All principal and accessory uses and structures permitted in the R1L Zoning District;

      (2)   Multi-sectional manufactured homes, as defined under § 153.005. To be permitted, multi-sectional manufactured homes must conform to all provisions set out in §§ 153.005 and 153.082;

      (3)   Factory built dwelling as defined under § 153.005;

      (4)   Steel storage containers to meet the minimum requirements as provided under § 153.086; and

      (5)   Educational institutions (publicly funded) as defined in § 153.005 (in any permitted buildings); and

      (6)   Accessory dwelling unit as defined in § 153.005, subject to the performance standards set out in § 153.075.5, with a minimum parcel size of 70,000 square feet.

Zoning/Density Regulations (in feet unless otherwise noted)
Dist.	Min Lot Size (in Sq. Ft. per Dwelling)	Min Lot Width and Depth	Min Yard Setbacks Min Building Spacing is 10 Feet All Classes				Max Building Height (Stories/Feet)		Max Lot Coverage (Percent)
			Front	Rear	Interior	Exterior
7.5	7,500	75	20	25	7	10	2	30	50
10	10,000	80	20	25	7	10	2	30	40
12	12,000	90	20	25	7	10	2	30	40
18	18,000	100	30	30	10	15	2	30	25
25	25,000	130	30	30	10	15	2	30	20
35	35,000	145	40	40	20	20	2	30	15
70	70,000	200	50	50	25	30	2	30	15
2A	87,120	225	50	50	25	30	2	30	10
175	175,000	300	50	50	30	50	2	30	10
5A	217,800	325	50	50	40	50	2	30	10
10A	435,600	500	50	50	50	50	2	30	5
36A	1,568,160	500	50	50	50	50	2	30	5

 

(Ord. 08-44 § 411, passed 10-21-2008; Am. Ord. 15-110, passed 4-7-2015)