The following regulations shall govern the design and layout of lots:
(A) The lot of arrangement and design shall be such that all lots will provide satisfactory building sites, properly related to topography and the character or surrounding development;
(B) All lots shall conform to or exceed the requirements of the Zoning Code;
(C) Each lot shall front on, be contiguous to or border on a public street;
(D) All side lot lines should be straight lines and should be at right angles to street lines or radial on curved street lines except where the Planning Commission determines that a variation would benefit the public interest;
(E) Lots with double frontage shall be avoided except where the Planning Commission determines that it is essential to overcome specific topographic disadvantages and orientation and location problem due to existing street;
(F) No corner lot shall have a width, measured at the required front setback line, of less than 75 feet;
(G) Lots fronting on a street upon which no other lost face should be avoided. No rear lot line should border adjacent side lot lines. Where the rear lot lines of a subdivision border a thoroughfare, the Planning Commission may require a screen plating contained in a non-access easement or reservation along such road; and
(H) No lot shall have an average depth which is more than five times its average width, nor shall the depth of any lot be less than 120 feet measured from the edge of the road right-of-way.
(Ord. 2317, passed 12-21-2006) Penalty, see § 155.999