(a) The lot arrangement and design shall be such that all lots provide satisfactory and desirable building sites, properly related to topography and the character of the surrounding development.
(b) All lots shall conform to or exceed the requirements of these Regulations and the zoning requirements for the district in which they are located and the use for which they are intended.
(c) All side lines of lots shall be at right angles to straight street lines and radial to curved street lines, except where the Planning Commission determines that a variation to this rule provides a better street and lot layout.
(d) Lots with double frontage shall be avoided except where the Planning Commission determines that double frontage lots are essential to provide separation of residential development from arterial streets or non-residential land uses, as provided in Section 1177.04(c).
(e) Corner residential lots shall have extra width sufficient to maintain building lines on both streets, as required by the Delta Zoning Code.
(f) All lots shall abut on a dedicated street.
(g) Utility easements should generally follow rear lot lines, where it is not practicable to install utilities within the road right of way, and provide continuous easement to public ways.
(h) Lot areas computed for the purpose of meeting minimum requirements listed above shall not include lands dedicated for use as street or road rights of way or other public use.
(Ord. 95-35. Passed 11-20-95.)