The following regulations shall govern the design and layout of lots.
(a) The lot arrangement and design shall be such that all lots will provide satisfactory building sites, properly related to topography and the character of surrounding development.
(b) All lots shall conform to or exceed the requirements of these Regulations and the zoning district requirements for the district in which they are located and the use for which they are intended.
(c) Each lot shall have a minimum sixty (60) feet frontage at the street right-of-way line, except for cul-de-sac lots.
(d) All side lot lines should be as near as possible to right angles to street lines and radial to curved street lines.
(e) Through lots shall be avoided.
(f) All lots shall have driveway access restricted to those interior streets platted as part of the proposed subdivision.
(g) No corner lot shall have a width at the building line less than seventy-five (75) feet. The minimum building setback on the side street side of a corner lot shall be fifteen (15) feet. When such corner lot abuts an interior lot which faces the same side street at such corner lot, the minimum building set back shall be thirty (30) feet.
(h) No lot shall have an average depth which is more than three times its average width, nor shall it have a depth of less than one hundred ten (110) feet except that whenever a lot fronts upon an exterior curved portion of a street, the centerline radius of which is one hundred (100) feet or less, then the minimum required lot depth may be reduced to not less than one hundred (100) feet.
(Ord. 2002-25. Passed 4-8-03.)