(A) Each lot intended for building purposes must contain a satisfactory building site and conform to applicable zoning regulations, other adopted codes and regulations, and these regulations.
(B) The following design standards apply to all lots intended for building purposes:
(1) No single lot may be divided by a municipal boundary line;
(2) No single lot may contain portions divided by another parcel or public right-of-way;
(3) Each lot must abut and have direct access to a public or private street or road. When an alley is used to provide access, another primary access must be available to the lot;
(4) Corner lots must be of sufficient area to provide acceptable visibility for traffic safety;
(5) No lot may have an average depth greater than five times its average width;
(6) Side lot lines must be at substantially right angles to street or road lines and radial to curved street or road lines;
(7) Through lots (a.k.a., double-frontage lots) are prohibited, except where essential to provide separation of development from traffic arteries or to overcome specific disadvantages of topography or orientation;
(8) All lots shall be developable in compliance with the city zoning; and
(9) The preliminary plat application shall demonstrate each lot can be developed with the intended purpose as allowed by the zoning ordinance and meet all standards of the zoning ordinance.
(Prior Code, § 11.02.060.080) (Ord. 151, passed 6-20-2016)