(A) (1) The installer shall request an inspection after all aspects of the installation have been completed.
(2) The Building Inspector will inspect the installation within ten business days after receiving the request.
(a) If the inspection is not completed within ten business days, the tenant or owner may occupy the manufactured home at their own risk.
(b) Occupancy before inspection does not imply approval of the installation.
(B) The Building Inspector shall approve the installation of a manufactured home, and allow the manufactured home to be occupied if the installation complies with the installation requirements listed in § 11.01.180.100 and the conditions of the building permit.
(C) If the installation does not comply with the installation requirements listed in § 11.01.180.100 and the conditions of the building permit, the Building Inspector shall provide the installer with a list of corrections that the installer must make.
(1) The list of corrections shall state a date by which the corrections must be completed.
(2) The Building Inspector shall reinspect the installation after the corrections are completed.
(3) If the items that require correction do not endanger the health or safety of the occupants, or substantially affect the habitability of the manufactured home, the Building Inspector may permit the owner of the manufactured home to occupy the manufactured home.
(D) A manufactured home which does or does not bear an insignia of approval from the U.S. Department of Housing and Urban Development may be permitted on rental lots within manufactured home parks; provided that the manufactured home has been installed in accordance with the provisions of this chapter, and inspected by City Building Inspector during the installation of the home and has been found to be in compliance with the following criteria:
(1) The manufactured home must have operable permanent heating facilities installed and maintained according to the heating equipment manufacturer’s specifications;
(2) The home must be equipped with operable plumbing facilities with hot and cold running water to include: toilet, bathtub or shower, and kitchen sink. All facilities shall be installed and maintained according to the plumbing equipment manufacturer’s specifications;
(3) All electrical service entrance conductors, service equipment, switches, lighting outlets, power outlets and appliances shall be installed and maintained according to the electrical equipment manufacturer’s specifications;
(4) The home must be weather-protected so as to provide shelter for the occupants against the elements;
(5) The home shall be structurally sound with no apparent hazardous conditions in floors, walls, ceilings and roofs;
(6) The home must be in good condition and well-maintained to include: the exterior painted surface, the exterior siding is intact and secure, and operable windows and doors. In addition, the home shall be free of infestations of insects, vermin or rodents; and
(7) The inspection form shall include a statement that inspections does not constitute a warranty that the home is safe or livable.
(Prior Code, § 11.01.180.130) (Ord. 169, passed 7-2-2018; Ord. 2021-15, passed 12-20-2021)