The following signs shall be permitted in A-I, A-2, and A-3 Residential Districts:
(a) One nameplate not exceeding a combined area of 216 square inches for each residential dwelling. Such nameplate shall not be subject to the permit requirements of this chapter.
(b) One building identification sign for each building of a developed parcel. Said signs shall not exceed eight square feet in area for each building and shall be subject to a review and the issuance of a sign permit by the Building Official.
(c) For nonresidential uses, such as uses fronting on Flint or State Streets and/or uses which have been granted a conditional use permit, signs are subject to the requirements of Section 1292.13 of this chapter.
(d) Except as otherwise provided, permitted signs may be anywhere on the premises, except that they may not project beyond one-half of the setback required, or within a required clear vision zone. If ground-mounted, the top shall not be over five feet above the ground, and if building-mounted, such sign shall be mounted flush to the building and shall not be mounted on any roof.
(Res. 24-95. Passed 2-13-95; Ord. 2002-05. Passed 6-24-02.)