(a) General provisions.
(1) A person may not reduce a lot below the minimum width requirements of this section, unless:
(A) the lot is platted for a community unit development; or
(B) the city or other governmental agency reduces the lot size by widening an abutting street. In this situation the minimum lot width is computed on the basis of the original lot size before widening.
(2) The lot width requirements in a planned development district are controlled by the planned development district regulations.
(3) The minimum lot width for a residential use is 10 feet, unless a larger minimum lot width is specified in Section 51-4.410.
(b) Lot width provisions for MH districts. In an MH district, a manufactured home must have the following minimum lot width:
(1) 30 feet for a manufactured home on a transient stand; or
(2) 40 feet for a manufactured home on a subdivided lot.
(c) Schedule of minimum lot width for residential use. Except as provided in this section, a person shall not erect, alter, or convert any residential structure or part of a structure to have a smaller lot width than is allowed in the larger of the lot width required in this section or the lot width required by the minimum regulations of Section 51-4.410. (Ord. Nos. 20360; 24731)