(a) The applicant for a permit to construct a private driveway or roadway shall submit three sets of drawings, covering such proposed construction, to the Village Engineer for approval. Drawings so submitted shall include, but not be limited to, the following:
(1) Data showing existing and immediately abutting property lines in sufficient detail to clearly define the location and extent of the proposed construction, together with its effect on abutting lands;
(2) Topographical data, both existing and proposed, in sufficient detail to clearly define the proposed construction and its effect on abutting lands. While paving surface gradient data is essential, surface water drainage patterns, both on-site and off-site, are primary objectives of this requirement.
(3) Data for surface water drainage facilities (i.e. storm sewers, catch basins, culverts, etc.), both existing and proposed. Where such facilities are proposed, construction details shall be shown on such drawings.
(4) A typical roadway cross-section showing the design detail of the proposed construction.
(b) A statement of usage shall accompany each submittal, such statement citing the type of vehicle expected to be provided for by the submitted design. In the case of truck traffic, the type of vehicle and anticipated loaded weights shall be included.
(c) Drawings and statements so submitted shall have been prepared by a professional engineer licensed to practice in the State and shall bear evidence of such license.
(Ord. 1970-42. Passed 10-28-70.)