Wastewater discharges to the POTW shall be expressly subject to all provisions of this chapter and all other applicable regulations, user charges and fees established by the city. The city may do any of the following.
(A) Set unit charges or a schedule of user charges and fees for the wastewater to be discharged to the POTW.
(B) Limit the average and maximum wastewater constituents and characteristics.
(C) Limit the average and maximum rate and time of discharge or make requirements for flow regulations and equalization.
(D) Require the installation and maintenance of inspection and sampling facilities.
(E) Establish specifications for monitoring programs which may include sampling locations, frequency of sampling, number, types, and standards for tests and reporting schedule.
(F) Establish compliance schedules.
(G) Require submission of technical reports or discharge reports.
(H) Require the maintaining, retaining and furnishing of pretreatment records relating to wastewater discharge as specified by the city, and affording the city access thereto, and copying thereof.
(I) Require notification to the city for any new introduction of wastewater constituents or any substantial change in the volume or character of the wastewater constituents being introduced into the wastewater treatment system.
(J) Require notification of slug discharges.
(K) Require other conditions as deemed appropriate by the city to ensure compliance with this subchapter.
(L) Require waste treatment facilities, process facilities, waste streams, or other potential waste problems to be placed under the specific supervision and control of persons who have been certified by an appropriate state agency as properly qualified to supervise the facilities.
(M) Require records and file reports to be maintained on the final disposal of specific liquids, solids, sludges, oils, radioactive materials, solvents, or other wastes.
(N) Develop BMPs to support objectives of this chapter, and which shall be considered enforceable pretreatment standards and requirements.
(O) Impose mass limitations or limits based on production rates, on users which are using dilution to meet applicable pretreatment standards or requirements or in other cases in which the imposition of mass limitations or limits based on production rates is appropriate.
(Ord. 257, passed 6-3-91; Am. Ord. 333, passed 5-16-16)