The city authorizes the placement of manufactured houses in residential zones within the city if such manufactured houses comply with the following conditions.
(A) Such houses shall comply with all zoning regulations for the zone in which they are located.
(B) A building permit and any other required permits shall be obtained for such manufactured housing.
(C) No such house located within an area platted after 1950 shall have a width of less than 20 feet at its narrowest point.
(D) No such house located on land platted previous to 1950 shall have a width of less than 20 feet at its narrowest point.
(E) Such houses shall be placed on permanent foundations which comply with the uniform building code as adopted in the state and which are solid for the complete circumference of the house.
(F) Any such manufactured house shall have exterior siding extending from within six inches of the dirt or two inches of concrete, which siding shall be of a conventional exterior dwelling-type material.
(G) Any such manufactured house shall have a pitched roof covered with shingles or tile and have eaves of not less than six inches.
(H) All such manufactured houses shall be built in compliance with M.S. §§ 327.31 to 327.35, as they may be amended from time to time.
(Prior Code, § 13.96)