A complete application for final plat approval shall be submitted to the city with applicable fees and escrows and shall include the following:
A. The plat shall be prepared by a land surveyor registered in the state and shall comply with state statutes, county requirements, and the regulations of this title. It shall incorporate all required changes, modifications and revisions required as a condition of preliminary plat approval. Otherwise, it shall conform to the approved preliminary plat. Unless not acceptable to the county recorder, the plat shall contain the following information as applicable:
1. Accurate angular and linear dimensions for all lines, angles, and curvatures used to describe boundaries, streets, alleys, easements, and areas to be reserved for public use. Dimensions of lot lines shall be shown in feet and hundredths; no ditto marks will be permitted. When lot lines are not at right angles to the street right of way line, the width of the lot shall be indicated.
2. A numbered identification system for all lots and blocks.
3. A boundary line survey including the measured distances and angles and the true distance and bearing between a known point on the boundary and the nearest official monument which shall be accurately described on the plat.
4. City, township, county or section lines accurately tied to the lines of the subdivision by distances and angles.
5. Radii, internal angles, points and curvatures, tangent bearings and lengths of all acres.
6. Name and location of the subdivision.
7. Accurate location of all monuments.
8. Graphic scale and north arrow.
9. Names of all streets.
10. Location of water bodies.
11. If the subdivision is a replatting or rearrangement of a legal subdivision, the original platting shall be shown by dotted lines.
B. Easements or deeds as may be required by the City for ponding areas, park land dedication or trails, utilities or other similar public purposes.
C. Cash, letter of credit or similar guarantees pursuant to Section 10-3-4 of this Title to the City related to performance and/or for installation of all required public improvements shall be provided by the applicant. These performance guarantees outlined in this Title or by City Council resolution shall be presented to the Director of Community Development and approved by the City attorney prior to the final plat being released for recording.
D. A subdivision agreement in conformance with Section 10-3-3 of this Title shall be prepared by the City attorney, for consideration by the City Council.
E. Copies of all proposed deed restrictions, restrictive covenants, articles of incorporation of homeowners’ associations and any other similar documents related to the subdivision.
F. A map showing the proposed street naming and lot addressing, conforming to the City’s system.
G. Any other information required by appropriate agencies or by the City Council as a condition of the preliminary plat approval.
H. A letter, certified by an engineer or surveyor, attesting to lot square footage.
I. A one to five hundred (1:500) scale, a one to eight hundred (1:800) scale, and a one to two hundred (1:200) scale Mylar of each final plat shall be submitted to the Director of Community Development prior to signing of the final plat for recording.
J. Certifications by attached information showing that all taxes and special assessments currently due on the property to be subdivided have been paid in full.
K. The subdivider shall, immediately upon recording, furnish the City with a tracing or Mylar and four (4) prints of the final plat showing evidence of the recording, prior to issuance of any building permits.
L. The form for approval by signature of county and city officials concerned with the recording of the plat is on file in the office of the City Clerk.