§ 52.045  HAULED WASTEWATER.
   (A)   Septic tank waste may be introduced into the POTW only at locations as may be designated by the coordinator, and at such times as may be established by the coordinator; provided, however, that nothing herein shall require the city or the POTW to accept any hauled or septic tank waste at any time from any source. Such waste shall not violate this chapter or any other requirements established by the city. The coordinator may require septic tank waste haulers to obtain individual wastewater discharge permits.
   (B)   Haulers of any industrial waste shall obtain individual wastewater discharge permits from the city prior to disposing industrial waste in the city POTW. The coordinator may require generators of hauled industrial waste to obtain wastewater discharge permits. The coordinator also may prohibit the disposal of hauled septic and/or industrial waste. The discharge of hauled industrial waste is subject to all other requirements of this chapter.
   (C)   Industrial waste haulers may discharge loads only at locations designated by the coordinator. No load may be discharged without prior consent of the coordinator. The coordinator may collect samples of each hauled load to ensure compliance with applicable limits and standards. The coordinator may require the industrial waste hauler to provide a waste analysis of any load prior to discharge.
   (D)   Industrial waste haulers must provide a waste-tracking form for every load. This form shall include, at a minimum, the name and address of the industrial waste hauler, permit number, truck identification, names and addresses of sources of waste, and volume and characteristics of waste. The form shall identify, at a minimum, the type of industry, known or suspected waste constituents and whether any wastes are RCRA hazardous wastes.
(Ord. 1433, passed 7-1-2002)