(A) All lots shall abut on an approved public or private street.
(B) It is not permitted to average the lot areas in a subdivision to meet the minimum lot areas established in this section. However, cluster developments shall be allowed in accordance with § 153.64 below.
(C) Lot lines shall be drawn to the right-of-way of any adjacent road except where an existing property line is drawn within an existing road right-of-way.
(D) For lots utilizing private water and septic systems, all lots shall be adequate in size to accommodate 100% replacement of individual septic systems as per Health Department regulations. Also, prior to final plat approval, each multi-family residential development shall receive written approval from the District Health Department if municipal water and sewer services are not available. The approval shall state that the lot(s) proposed for multi-family residential units is (are) adequate to accommodate the proposed multi-family residential use.
(E) The Planning Board, upon recommendation by the Administrator, may approve the limited use of pan handle lots where it is impractical to serve an isolated lot by an existing or proposed road. A pan handle lot shall have a minimum road frontage of 35 feet for an access strip to an isolated building site. The access strip should not exceed 300 feet in length and the access strip shall not be used to calculate the minimum lot area unless the strip exceeds 70 feet in width.
(F) Minimum lot size requirements and setbacks are contained in the Zoning Ordinance (Chapter 154).
(Ord. passed 5-17-2007)