SECTION 7A-824. PERFORMANCE STANDARDS FOR CONTRACTOR SHOPS WITH CONTRACTOR YARD-LIMITED.
All Contractor Shops with accessory Contractor Yard established after December 28, 2022 shall meet the following minimum performance standards in addition to any conditions of approval that may be established pursuant to a conditional use permit.
   A.   Spacing Requirements: No Contractor Shop with accessory Contractor Yard shall be located less than a quarter mile from another Contractor Shop with accessory Contractor Yard.
   B.   Outdoor storage and excavation as permitted by Conditional Use Permit shall not encroach on any required setbacks or landscape yards and shall be effectively screened from view from public streets and adjacent property using landscaping supplemented by fencing.
   C.   Dust/Particulate Management Plan: The owner/operator of a Contractor Shop with accessory Contractor Yard must submit and comply with a dust management plan that includes, at a minimum, the following:
      1.   Stockpiles and non-paved surfaces shall be sprayed or coated as necessary to reduce airborne particulates.
      2.   Public roads to and from the property shall be swept and cleaned as necessary to eliminate migration of dust or dirt off the property.
      3.   All trucks hauling materials to/from the facility shall be covered to reduce airborne particulates.
   D.   Screening: Landscaping supplemented by fencing, if necessary, shall be required to enclose the screen such storage yards from direct views from adjacent public streets or from adjacent commercial or residential properties. The location of such outdoor storage areas shall be consistent with all applicable standards of the district in which it is located.
   E.   Other Regulations: Yards shall be maintained in a clean and orderly manner. Junk shall not be permitted to be stored.
[§ 7A-824, added by Ord. No. 22-11, effective January 12, 2023.]