(a) No permit is required to place, erect or display the following signs in the I-1 District:
(1) No permit is required to place, erect or display any sign permitted under Section 1157.06 in the Industrial District.
(2) Festoons.
(b) A permit is required to place, erect or display the following signs in the I-1 District.
(1) Industrial signs.
A. One freestanding sign and one ground-mounted sign to identify the industry or center to be used by all tenants occupying the premises.
1. The maximum height of a freestanding sign shall be thirty- five (35) feet, the maximum area shall be forty (40) square feet per sign face, and the total area shall not exceed eighty (80) square feet.
2. The maximum height of a ground mounted sign shall be six (6) feet, the maximum area shall be forty-eight (48) square feet per sign face, and the total area shall not exceed sixty-four (64) square feet.
3. Such sign shall be placed or erected on the same lot to which it is an accessory use no closer than ten (10) feet from the right-of-way.
B. Any combination of three (3) wall, painted wall, projecting, awning, or under-canopy signs shall be permitted.
1. The maximum area of such signs, collectively, shall be three (3) square feet per lineal foot of building width.
2. The maximum height of such signs shall be no higher than the wall to which they are fastened.
(Ord. 2002-034. Passed 5-7-02.)