All lots and buildings shall meet the following dimensional requirements:
Maximum Height of Building | Minimum Yard Setback (Per Lot in Feet) | |||
In Feet | Front (adjacent to right-of-way having width of 120 feet or greater) | Front (adjacent to right-of-way having width of less than 120 feet) | Side | Rear |
50a | 60b | 25b | 10c, d | 10c, d |
Figure 1: I-2 Dimensional Standards Diagram:
FOOTNOTES TO SCHEDULE OF REGULATIONS CHART
(a) Modifications in height requirements above the 35 feet allowed within the district may be permitted subject to the requirements and conditions set forth in Chapter 1293.
(b) In the instance of a corner lot or parcel of land abutting more than one public thoroughfare, all frontages shall require the minimum front yard setback as specified above.
(c) Off-street loading and unloading space shall be provided in the rear yard or an interior side yard, unless the side yard abuts a Residential District and shall, in no instance, be permitted in a front yard. In those instances where exterior side yards abut an Industrial District, loading and unloading may take place in the exterior side yard, except that in those instances where exterior side yards have a common relationship with an Industrial District across a public thoroughfare, loading and unloading may take place in the side yard when the setback is equal to at least 50 feet. Off-street loading space shall further meet the requirements of Section 1294. Where an alley exists or is provided at the rear of the buildings, the rear building setback and loading requirements may be computed from the centerline of such alley, but separately from the off-street parking requirements.
(d) The minimum distance between any two buildings shall be 20 feet. In no instance shall a building be located closer than 50 feet to a residentially-zoned district.
(Ord. 260-A-58. Passed 8-22-83; Ord. Passed 10-30-23.)