All lots and buildings shall meet the following dimensional requirements:
Maximum Height of Building | Minimum Yard Setback (Per Lot in Feet) | |||
In Stories | In Feet | Front | Side | Rear |
5 | 60 | 75a | 30b, c | 60b, c |
Figure 1: B-4 Dimensional Standards Diagram:
FOOTNOTES TO SCHEDULE OF REGULATIONS CHART
(a) In the instance of a corner lot or parcel of land abutting more than one public thoroughfare, all frontages shall require the minimum front yard setback specified in the district. No off-street parking or maneuvering lanes shall be permitted within the 25 foot front yard setback measured from the proposed right-of-way line. Parking shall be permitted to occupy the remaining 50-foot setback.
(b) Off-street loading and unloading space shall be provided in the rear yard or an interior side yard, unless the side yard abuts a Residential District and shall, in no instance, be permitted in a front yard. In those instances where exterior side yards abut an Industrial District, loading and unloading may take place in the exterior side yard, except that in those instances where exterior side yards have a common relationship with an Industrial District across a public thoroughfare, loading and unloading may take place in the side yard when the setback is equal to at least 50 feet. Off-street loading space shall further meet the requirements of Chapter 1296. Where an alley exists or is provided at the rear of the buildings, the rear building setback and loading requirements may be computed from the centerline of such alley, but separately from the off-street parking requirements.
(c) Parking may be permitted to occupy the rear and side yard setbacks. However, a minimum landscaped setback of 20 feet shall be maintained from the rear and side property lines.
(Ord. 260-A-305. Passed 3-23-98; Ord. Passed 10-30-23.)