All lots and buildings shall meet the following dimensional requirements.
Maximum Height of Building | Minimum Yard Setback (Per Lot in Feet) | ||
In Feet | Front | Side | Rear |
35a | 25b | 10c, d | 10c, d |
Figure 1: B-1 Dimensional Standards Diagram :
FOOT NOTES TO SCHEDULE OF REGULATIONS CHART
(a) Modifications in height requirements above the 35 feet allowed within the district may be permitted subject to the requirements and conditions set forth in Chapter 1293.
(b) All required front yard setbacks shall be measured from the proposed right-of-way line of any abutting thoroughfare. In the instance of a corner lot or parcel of land abutting more than one public thoroughfare, all frontages shall require the minimum front yard setback specified in the district. Off-street parking shall be permitted to occupy a front yard setback in excess of the minimum setback of 25 feet.
(c) The minimum distance between any two buildings shall be 20 feet. In no instance shall a building be located closer than 25 feet to a residentially-zoned district.
(d) Off-street loading and unloading space shall be provided in the rear yard or an interior side yard, unless the side yard abuts a Residential District and shall, in no instance, be permitted in a front yard. In those instances where exterior side yards abut an Industrial District, loading and unloading may take place in the exterior side yard, except that in those instances where exterior side yards have a common relationship with an Industrial District across a public thoroughfare, loading and unloading may take place in the side yard when the setback is equal to at least 50 feet. Off-street loading space shall further meet the requirements of Chapter 1263. Where an alley exists or is provided at the rear of the buildings, the rear building setback and loading requirements may be computed from the centerline of such alley, but separately from the off-street parking requirements.
(Ord. 260-A-58. Passed 8-22-83; Ord. Passed 10-30-23.)