The regulations in this section or set forth elsewhere in this chapter, when referred to in this section, are the regulations in the C-2M General Commercial/Light Manufacturing District.
(A) Use regulations. A building or premises shall be used only for the following purposes:
(1) Any use permitted in the C-2 General Commercial District. No residential uses allowed;
(2) Light manufacturing uses are permitted, provided the Council enters the following findings concerning the use:
(a) The establishment, maintenance or operation of the permitted use will not be detrimental to public health, safety, morals, comfort or general welfare;
(b) The permitted use will not be injurious to the use and enjoyment of other properties in the immediate vicinity;
(c) The permitted use will not substantially diminish and impair property values within the neighborhood;
(d) The permitted use will be compatible with and will not impede development and/or the character of the area where it is located;
(e) A site and building development plan, including plans for outdoor storage, if any, has been reviewed by the Public Works Director and the Fire Marshal;
(f) The permitted use will not be in conflict with the comprehensive plan; and
(g) Inspection by the Fire Marshal to comply with the Fire Prevention Code and established use compliance by the Building and Neighborhood Services Director or his or her designee.
(3) Existing manufacturing uses approved prior to (amendment adoption date) are exempted from the provisions of division (A)(2) above.
(C) Parking and loading requirements. Off-street parking and loading spaces shall be provided in accordance with the requirements for specific uses set forth in § 159.065.
(E) New construction/additions. All new construction/additions shall meet the requirements of § 159.046(O).
(1999 Code, § 165.13) (Ord. 2247, passed 10-9-2001; Ord. 2256, passed 6-25-2002) Penalty, see § 159.999