(A) Every solid rubber tire on a vehicle moved on any highway shall have rubber on its entire traction surface at least one-inch thick above the edge of the flange of the entire periphery.
(B) No tire on a vehicle moved on a highway shall have on its periphery any clock, stud, flange, cleat, or spike or any other protuberance of any material other than rubber which projects beyond the tread of the traction surface of the tire, except that:
(1) This prohibition shall not apply to pneumatic tires with metal or metal-type studs not exceeding 5/16 of an inch in diameter inclusive of the stud-casing with an average protrusion beyond the tread surface of not more than 7/64 of an inch between November 1 and April 1, except that school buses, mail carrier vehicles, and emergency vehicles shall be permitted to use metal or metal-type studs at any time during the year;
(2) It shall be permissible to use farm machinery with tires having protuberances which will not injure the highway; and
(3) It shall be permissible to use tire chains of reasonable proportions upon any vehicle when required for safety because of snow, ice, or other condition tending to cause a vehicle to slide or skid.
(C) (1) No person shall operate or move on any highway any motor vehicle, trailer, or semitrailer:
(a) Having any metal tire in contact with the roadway; or
(b) Equipped with solid rubber tires.
(2) Division (C)(1) above shall not apply to farm vehicles having a gross weight of 10,000 pounds or less or to implements of husbandry.
(D) The village may, in its discretion, issue special permits authorizing the operation upon a highway of traction engines or tractors having movable tracks with transverse corrugations upon the periphery of such movable tracks or farm tractors or other farm machinery.
(Neb. RS 60-6,250)
Statutory reference:
Rubber tired cranes, see Neb. RS 60-6,288