The application for preliminary plan shall, at a minimum, include the following information:
(a) Proposed name of the subdivision and its location;
(b) Names, addresses and telephone numbers of owners and/or developers;
(c) Name, address and registration number of the Professional Engineer or Professional Surveyor preparing the plan.
(d) Date, north arrow and plan scale;
(e) Boundary lines of the proposed development and the total tract owned or controlled by Owner /Developer, along with the acreage of both;
(f) Existing physical features, including any existing structures, with contour lines at not more than two foot (2') intervals if slope of the site is fifteen percent (15%) or less, and five feet (5') feet if slope of the site is more than fifteen percent (15%). Contours shall be based on USGS topographic information, recent aerial photography and/or ground surveys;
(g) Portions of the site identified by the Federal Emergency Management Agency (FEMA) as within the Official Flood Hazard Area for the 100-Year Flood, as specified on Official Flood Hazard studies, or Flood Hazard Boundary Map(s) for Circleville, as may be amended.
(h) Portions of the site subject to federal wetlands requirements.
(i) Existing sewers, water mains, transmission lines, culverts and other underground structures within the tract, adjacent to the tract or that will be used in developing the tract, indicating pipe sizes, grades and locations;
(j) Proposed lot or parcel dimensions, street rights-of-way widths, water, sanitary sewer and storm sewer layout, along with grades and elevation of proposed streets, storm sewers and sanitary sewers;
(k) Other utility system layouts and requirements;
(l) Proposed methods for addressing storm runoff;
(m) Parcels of land intended to be dedicated or temporarily reserved for public use or reserved by deed covenant with the conditions proposed for such covenant, and for the dedications;
(n) For commercial and/or industrial development, the location, dimensions and grades of proposed parking and loading areas, alleys, streets and points of vehicular ingress and egress to the site.
All drawings shall be submitted in AutoCAD format and as PDF images.
(Ord. 12-68-2019. Passed 12-17-19; Ord. 08-48-2022. Passed 8-2-22.)