(a) All lots shall have the required frontage on an improved public street or an approved private street.
(b) Lots in subdivisions located within the City of Circleville shall meet the dimension and area requirements of the zoning district in which such subdivision is located. Residential lots that are located outside the zoning authority of the City of Circleville but within the subdivision jurisdiction of this Zoning Ordinance shall conform to the zoning requirements of the jurisdiction in which they are located. All lots shall also meet the following requirements:
(1) All residential lots shall be approximately rectangular in shape, and should not have a depth in excess of three (3) times their width, except where extra depth is necessary due to topography and/or natural conditions, or to meet other requirements of this Zoning Ordinance.
(2) Double frontage and reverse frontage lots should be avoided, except where required to provide separation from arterial streets, or to overcome specific conditions of topography and/or orientation. In such cases, an easement shall be provided along the rear lot line across which there shall be no vehicular access.
(3) Whenever possible, residential subdivisions shall be designed so that corner lots have a larger area than interior lots
(4) Whenever possible, side lot lines should be at right angles or radial to street lines.
(5) When necessary, easements shall be provided along side and rear lot lines for utility lines. Easements shall be provided on both sides of any open drainage course, for the purposes of widening, deepening or general maintenance. Such easements shall comply with the requirements of Section 1193.08 below. In no case shall a fence or any other obstruction be constructed on this easement. Notwithstanding the above, the removal of any existing obstruction within such easement shall be the responsibility of the owner of the property at the time such action is required.
(Ord. 06-45-2015. Passed 6-16-15.)