The maximum ratio of lot width to lot depth shall be:
Zone | Ratio |
Zone | Ratio |
A | 1:5 |
R-11 | 1:2 |
R-21 | 1:2 |
R-2P1 | 1:2 |
R-3 | 1:3 |
R-4 | 1:3 |
C-1 | 1:5 |
C-2 | 1:5 |
I | 1:5 |
Note:
1. Lots in excess of 1/4 acre; lots 1/4 acre or under, no applicable ratio.
The lot depth is measured at the farthest point the rear lot line is from the front lot line. The lot width is measured at the point of the front yard setback, and, in the case of a corner lot, the shortest line of the two (2) sides bordering a street shall be used. For tracts that are on hillsides, irregularly shaped, or that have unusual conditions, drainage, easements or other such matters, which may make these ratios unworkable, the Community Services Director and other applicable city officials shall work with the owner to devise a plan for such a lot that is workable. Any deviations from the above ratios shall be subject to approval by the land use and development commission either at the preliminary plat stage or upon special application to the commission. (Ord. 755, 2016; amd. Ord. 845, 2022)