11-4-3: FINAL PLAT:
The final plat shall be clearly and legibly drawn to a scale of one hundred feet (100') or less to the inch on tracing cloth or mylar with black waterproof ink, or equivalent. The final plat and/or accompanying documents shall show the following information:
   A.   Name of subdivision.
   B.   Approximate true north point, date and scale.
   C.   Names and signatures of the owner, subdivider, and land surveyor; signature and seal of registered engineer on all engineering drawings.
   D.   The legal description of the property subdivided, with the surveyor's certificate and seal to the effect that the plat represents a survey made by him and that all monuments are set as shown.
   E.   The accurate location and description of all monuments.
   F.   All angular and linear data along the exterior boundaries of the subdivision. Boundary bearings for subdivisions over one hundred thousand (100,000) square feet in an area shall be measured with reference to the true meridian.
   G.   Locations and widths of all streets and sidewalks, together with names of streets.
   H.   Location, dimensions and status of all easements.
   I.   Lot lines with accurate dimensions.
   J.   Radii of all curves and lengths of arcs.
   K.   Sufficient data to determine readily the location and length of all lines.
   L.   All lot and block numbers.
   M.   A copy of the plans and specifications for the required streets, alleys, public walk improvements, sanitary sewers, storm sewers, water mains, gas mains, underground electric, telephone and TV cables, and any other public utility facility.
   N.   A certificate from a registered professional engineer employed by the subdivider that all required streets, alleys, public walk improvements, water mains, sanitary sewers, storm sewers, gas mains, underground electric, telephone, TV cables, and any other public utility facilities have been constructed in accordance with the plans and specifications as submitted or a surety bond as required in subsection 11-3-1E11b of this title.
   O.   Provision shall be made on the face of the plat for approval of the Village President and Board of Trustees as follows:
The proposed Final Plan of subdivision as shown on this plat and accompanying documents has received final approval by the President and Board of Trustees of the Village of Chebanse.
Dated this day       of                 , 20    .
PRESIDENT AND BOARD OF TRUSTEES OF THE VILLAGE OF CHEBANSE.
                                            
                  Village President
ATTEST:
                       
Village Clerk
(Ord. 91-6, 10-7-1991)