All permitted or conditional uses are subject to the following required conditions:
(A) Indoor/outdoor operations. All permitted uses in the MX-1 District must be conducted within completely enclosed buildings unless otherwise expressly authorized. This requirement does not apply to off-street parking or loading areas, automated teller machines, or outdoor seating areas.
(B) Off-street parking.
(1) Off-street parking requirements for residential uses shall be the same as the underlying, non-mixed-use zoning.
(2) No off-street parking is required for non-residential uses in MX-1 Districts unless such uses exceed 3,000 square feet of gross floor area, in which case off-street parking must be provided for the floor area in excess of 3,000 square feet.
(3) Off-street parking spaces must be located to the rear of the principal building or otherwise screened so as to not be visible from public right-of-way or residential zoning districts.
(C) Transparency.
(1) A minimum of 60% of the street-facing building facade between two feet and eight feet in height must be comprised of clear windows that allow views of indoor space of product display areas.
(2) The bottom of any window or product display window used to satisfy the transparency standard of division (1) above may not be more than four feet above the adjacent sidewalk.
(3) Product display windows used to satisfy these requirements must have a minimum height of four feet and be internally lighted.
(D) Doors and entrances.
(1) Buildings must have a primary entrance door facing a public sidewalk. Entrances at building corners may be used to satisfy this requirement.
(2) Building entrances may include doors to individual shops or businesses, lobby entrances, entrances to pedestrian-oriented plazas, or courtyard entrances to a cluster of shops or businesses.
(E) Vehicle and driveway access. No curb cuts are allowed for lots that abut alleys.
(Ord. 2014-06, passed 10-13-2014)