The following minimum requirements shall be observed in the R-4 Multiple-Family Residential District subject to the additional requirements, exceptions, and modifications set forth in this title. All requirements and setbacks are to be construed as indicating the minimum footages permitted unless otherwise specified.
(A) Lot area.
(1) Base lot minimums. Within the R-4 Multiple-Family Residential District, the following minimum base lot requirements shall be imposed. The base lot shall represent the smallest lot or parcel which may accommodate development within the framework of the permitted density of § 224.07 (Development Density) of this title prior to subdivision of unit lots.
(a) 15,000 square feet.
(2) Unit lots; two-family and townhome units. The following minimum unit lot requirements shall be applied to the subdivision of two-family dwellings or townhouses to permit individual private ownership of a single dwelling within such a structure:
(a) Two-family or townhome unit lots shall have sufficient lot area to include the living area, garages, decks, patios, or porches of the individual dwelling units.
(B) Lot width. 100 feet.
(C) Lot depth. 100 feet.
(D) Front yard setback. 30 feet to curb on private streets or 20 feet to right-of-way.
(E) Rear yard setback. 20 feet or the height of the building, whichever is less.
(F) Side yard setback. 10 feet.
(G) Side yard setback corner lot. 30 feet to curb on private streets or 20 feet to right-of-way.
(H) Maximum impervious surface coverage. 45%.
(I) Maximum height.
(1) Principal buildings. 3 stories or 40 feet, whichever is less.
(2) Accessory buildings. As regulated by § 209.04(G) (General Provisions and Standards for all Zoning Districts) of this title.
(Ord. 2011-06-07A, passed 6-7-2011)