In compliance with the Arizona Administrative Code:
(A) The town may require a customer to pay for and install, maintain, test and repair a backflow- prevention assembly if required by the Arizona Administrative Code.
(B) A backflow-prevention assembly required to be installed by the customer under this section shall comply with the requirements set forth in the Arizona Administrative Code.
(C) The town shall give any customer who is required to install and/or test a backflow-prevention assembly written notice of said requirement. The customer shall be given 30 days in which to comply with this notice.
(D) Testing shall be in conformance with the requirements of the Arizona Administrative Code.
(E) The customer shall provide the town with records of installation and testing. For each backflow assembly, these records shall include:
(1) Assembly identification number and description;
(2) Location;
(3) Date(s) of test(s);
(4) Description of repairs made by tester; and
(5) Tester's name and certificate number.
(F) If the backflow-prevention assembly has not been installed or fails any test, the assembly shall be installed and/or repaired by the customer and tested within 14 days of written notice by the town. Failure to install or to remedy the deficiency or dysfunction of the assembly, or failure to retest, shall be grounds for termination of water utility service.
(Ord. O2011-03, passed 2-7-11)