Dwelling units which meet the definition of a modular home as defined in § 153.002 are permitted in zoning districts R-20MF, R-20, R-12, R-8, RRCD and CR, provided the units comply with the following requirements:
(A) The home must be constructed to meet coastal and flood plain construction standards of the State Building Code and the town's zoning, subdivision, and building standards.
(B) No roof will have less than a four in 12 pitch and will have a roof covering that meets Section 26 of the North Carolina Uniform Residential Building Code, Volume I. All roof structures shall provide an eave projection of no less than 16 inches.
(C) The home must provide a minimum distance of seven feet, six inches from the top of the foundation to the bottom of the eave.
(D) The home is to be placed on a permanent foundation as required by the State Building Code for permanent dwellings.
(E) The home must be placed on the lot so that its front entrance faces the front of the lot and all setback requirements are met.
(F) If placed on pilings, an engineer or architect will be required to insure compliance with Section 37 of the North Carolina Uniform Residential Building Code Volume land relevant CAMA/Flood Zone requirements.
(Res. passed 4-10-97; Am. Res. passed 4-8-10)