(A) An application for multi-family uses shall be accompanied by schematic plans showing:
(1) Proposed locations of buildings and their general exterior dimensions.
(2) Proposed use of all land within the area requested for rezoning.
(3) Dimensions between all buildings and from buildings to property lines.
(4) Traffic, parking and circulation plan, showing proposed locations and arrangement of parking spaces and ingress and egress to and from adjacent streets.
(5) Proposed location and material of any screening walls, fences or plantings.
(6) Proposed exterior design of buildings.
(7) Schedule of number and size of apartments within the project.
(8) Proposed time schedule and staging, if any, for construction of the project.
(B) Development requirements within the R-20MF multi-family district shall be as specified in the following subsections:
(1) The minimum area requirement shall be 20,000 square feet for the first dwelling unit in the project and 5,000 square feet for each additional dwelling unit. (See § 152.42(K))
(2) The minimum setback from street, and minimum side and rear yards shall be 40 feet.
(3) The minimum unobstructed open space shall be 70% of total lot area.
(4) The maximum height of structures shall not exceed the higher of:
(a) Twenty-six feet above the regulatory flood protection elevation; or
(b) Thirty-five feet above the mean elevation.
(5) Every building shall be separated on every side, from any other building within the building group by a distance of at least 25 feet.
(6) Parking of motor vehicles shall not be permitted within the required setback.
(C) In approving an application for R-20MF multi-family districts, the Town Board shall find that the proposed development will be compatible with general neighborhood development plans, will not place excessive traffic load on local streets and that the site can be developed according to a site plan that will minimize adverse effects on any adjacent single-family residential areas.
(D) Site development within the R-20MF multi-family district shall conform to the schematic plan and associated requirements approved by the Town Board. Modification of the development plan and associated requirements may be made by the Town Board subsequent to their initial approval upon application thereof by the owner of the property.
(E) Following Town Board approval of an R-20MF multi-family district, the property for which approval was granted shall be labeled “R-20MF M.D.” on the official zoning map.
(Ord. passed 6-8-78; Am. Res. passed 12-13-07; Am. Res. passed 4-8-10) Penalty, see § 10.99