§ 158.084 COMMERCIAL AND INDUSTRIAL DISTRICTS: BULK REQUIREMENTS.
   (A)   Bulk requirements in the Commercial Districts.
      (1)   The following requirements shall be observed for nonresidential and group living uses in the commercial districts, subject to the provisions of § 158.130:
         (a)   Front yard:  minimum 10 feet.
         (b)   Side yard: minimum 10 feet.
         (c)   Rear yard: minimum 15 feet.
         (d)   Height: maximum 50 feet.
      (2)   Additional bulk requirements for Planned Commercial Centers are as provided for in § 155.094.
      (3)   The bulk requirements for dwellings in the Rural Villages shall be the same as in the R-10,000 District, and where adjoining any Residence District, the side yard shall be not less than 25 feet.
      (4)   The bulk requirements for dwellings not in the Rural Villages shall be as follows:
         (a)   For dwellings that were in the B-NR District, the bulk requirements shall be the same as in the R-10,000 District, and where adjoining any Residence District, the side yard shall be not less than 25 feet.
         (b)   For dwellings that were in the B-G District, the bulk requirements shall be the same as in the R-7,500 District, and where adjoining any Residence District, the side yard shall not be less than 15 feet.
      (5)   The bulk requirements for age-restricted housing shall be the same as for nonresidential uses.
      (6)   Within a Business Park, the yards on both sides of an interior lot line may be zero, and the Planning Commission may reduce other yard requirements.
   (B)   Bulk requirements in the Industrial Districts.
      (1)   The following requirements shall be observed in the industrial districts, subject to the provisions of § 158.130:
         (a)   Front yard:  minimum 10 feet.
         (b)   Side yard: minimum 20 feet.
         (c)   Rear yard: minimum 20 feet.
         (d)   Height: maximum 50 feet.
   (C)   Bulk requirements for accessory uses in the commercial and industrial districts shall be as set forth in § 158.130(C)(2).
   (D)   Within a Business/Industrial Park or an Industrial Park, the yards on both sides of an interior lot line may be zero, and the Planning Commission may reduce other yard requirements.
(Ord. 2019-06, passed 12-12-2019)