Monuments shall be placed at all corners and angle points of the outside boundary, but no further than one-fourth mile apart. The monuments shall be of concrete, not less than six inches in diameter and 36 inches deep, with a center copper dowel three inches long cast in place. Iron pipe or steel bars not less than one-half inch in diameter and 24 inches long shall be set at all lot corners, at each end of all curves, at the points where a curve changes its radius, and at all angle points in any line that are not otherwise marked by monuments. The monuments and markers shall be set level with the finished grade. The developer shall verify the existence of the monuments and markers after the completion of all construction and replace any that are damaged or missing before final acceptance of the subdivision by the Village Board.
(Ord. 2021-05-15, passed 5-3-2021)