§ 16-3-9 BULK AND DIMENSIONAL STANDARDS.

   (A)   The following Table of Bulk and Dimensional Standards addresses the requirements applicable to the development or use of a lot in a given district.

Table 16-3-9: Bulk and Dimensional Standards

Standard

R-1 (Res)

R-1 (Non- Res)

R-2

R-3

R-4 (SUA2)

R-4 (SUA3 +)

R-4 (MU)

B-1

B-2

B-3

O-S

I

A. Lot Standards (Minimum)

1. Lot Area

20,000 square feet

n/a

10,000 square feet

7,500 square feet

10,000 square feet

4,500 square feet

4,300 square feet

n/a

n/a

n/a

n/a

1 acre

2. Lot Width

100 feet

100 feet

75 feet

60 feet

75 feet

40 feet

n/a

20 feet

60 feet

60 feet

60 feet

75 feet

B. Setbacks (Minimum, unless otherwise specified)

1. Front Yard

40 feet

40 feet

25 feet

25 feet

25 feet

25 feet

25 feet

(1)

25 feet

25 feet

40 feet

60 feet (2)

2. Exterior Side Yard

25 feet

25 feet

25 feet

25 feet

25 feet

25 feet

25 feet

(1)

25 feet

25 feet

40 feet

60 feet (2)

3. Interior Side Yard

10 feet

10 feet

8 feet

7.5 feet

7.5 feet

7.5 feet

7.5 feet

(1)

15 feet

15 feet

10 feet

10 feet

4. Rear Yard

40 feet

30 feet

30 feet

30 feet

30 feet

30 feet

30 feet

(1)

40 feet

40 feet

40 feet

20 feet

C. Building Standards (Maximum)

1. Floor Area Ratio

n/a

0.6

n/a

n/a

n/a

n/a

n/a

0.8

0.6

0.6

0.6

0.8

2. Height

35 feet

45 feet

35 feet

35 feet

35 feet

35 feet

35 feet

50 feet

35 feet

40 feet

45 feet

50 feet

3. Lot Coverage

30%(3)

n/a

30%(3)

30%(3)

40%

50%

50%

n/a

n/a

n/a

n/a

n/a

(1) Setbacks in the B-1 District shall be as established through the Planned Development and Gary Avenue Corridor Review Processes.

(2) If adjacent right-of-way is less than 80 feet wide, the minimum setback shall be 40 feet.

(3) See Section 16-3-8 (E)(3) for lot coverage exceptions for properties with single-unit detached dwelling units.

 

(Ord. 2021-05-15, passed 5-3-2021; Ord. 2022-09-39, passed 9-6-2022)