1270.07 BUILDING SETBACK REQUIREMENTS.
   Every permitted use of land and structures shall be located on a lot in a manner that maintains the minimum building setbacks set forth in this Section for the district in which the lot is located, measured from the appropriate lot line. Each resulting setback shall remain unobstructed by structures except as otherwise specifically permitted in this Code.
   (a)   Setback from Street Rights-of-Way. Each lot shall maintain the minimum building setback measured from the street right-of-way. Corner lots shall comply with the setback for each lot line adjacent to a street right-of-way.
   (b)   Table 1270.07: Minimum Building Setbacks.
Table 1270.07
MINIMUM BUILDING SETBACKS
M-1 Office/
Limited Manufac- turing
 
M-2 General Manufac- turing
 
M-3 Urban Manufac- turing
M-4 Open Space/ Heavy Manufac- turing
(1)   Minimum building setback for lots fronting on existing streets
   A.   Minimum Setback from Street ROW
40 feet
40 feet
10 feet1
100 feet
   B.   Setback from side and rear lot line abutting nonresidential zoning district
30 feet
30 feet
15 feet
50 feet
   C.   Setback from side and rear lot line abutting residential zoning district   
50 feet
75 feet
25 feet
200 feet
(2)   Minimum building setback for lots fronting on new streets in industrial subdivision
   A.   Front setback
30 feet
30 feet
NA
NA
   B.   Side and Rear setbacks
      1.   Adjacent to non- residential zoning district
20 feet
20 feet
NA
NA
      2.   Adjacent to residential zoning district
50 feet
75 feet
NA
NA
Notes to Table 1270.07:
1 The maximum setback shall be 30 feet
NA = Not applicable
 
(Ord. 8-13. Passed 5-14-13.)