The table below shows the density schedule and development standards (listed in the left hand column) required in each zoning district (columns labeled Rural-190 through C). The number shown in the column is the required minimum or maximum standard as applicable. If there is a number in parenthesis ( ) in the column, there are additional conditions, provisions, and/or clarifications that apply to that development standard in that zoning district. These conditions, provisions, and/or clarifications will be found in the corresponding numbered paragraphs listed in Section 6.02 of this Article.
DEVELOPMENT STANDARDS
| ||||||||||
Rural- 190 | Rural- 70 | Rural- 43 | R1-35 | R1-18 | R1-10 | R-3 | L | GO | C |
DEVELOPMENT STANDARDS
| ||||||||||
Rural- 190 | Rural- 70 | Rural- 43 | R1-35 | R1-18 | R1-10 | R-3 | L | GO | C | |
Maximum Height - Feet | 24(1) | 24(1) | 24(1) | 24(1) | 24(1) | 24(1) | 24(1) | 30(2) | 30(2) | 30(2) |
Minimum Front Yard - Feet | 60(3), (6) | 60(3), (6) | 40(3), (6) | 40(3), (6) | 30(3), (6) | 20(3), (6) | 25(3), (6) | 25(3), (6) | 40(6) | 10(3), (6) |
Minimum Side Yard - Feet | 30(6) | 30(6) | 30(6) | 20(6) | 10(6) | 7(6) | 10(6) | 10(6) | 20(6) | 0(6) |
Minimum Rear Yard - Feet | 60(6) | 60(6) | 40(6) | 40(6) | 30(6) | 25(6) | 25(6) | 25(6) | 40(6) | 0(5), (6) |
Minimum Lot Area - Square Feet | 190,00 0 | 70,00 0 | 43,56 0 | 35,00 0 | 18,00 0 | 10,00 0 | 43,56 0 | 43,56 0 | 35,00 0 | 6,00 0 |
Minimum Lot Width - Feet | 300 | 230 | 145 | 145 | 120 | 80 | 145 | 145 | 145 | 60 |
Minimum Lot Area Per Dwelling Unit - Square Feet | 190,00 0 | 70,00 0 | 43,56 0 | 35,00 0 | 18,00 0 | 10,00 0 | 6,000 | N/A | N/A | N/A |
Maximum Lot Coverage - % (area under roof) | 6%(8) | 13%(8) | 17%(8) | 20%(8) | 25%(8) | 30%(8) | 50%(8) | 60%(8) | 25%(8) |
60%(8) |
Maximum Disturbed Lot Area - % | 18%(7) | 39%(7) | 51%(7) | 60%(7) |
75% | 100% | 100% | 100% | 75% | 100 % |
Next Doc