All single-family detached homes except in the R-M, Single-Family Manufactured Home Park District, shall conform to the following requirements.
(A) Perimeter foundation. Be constructed upon a continuous perimeter foundation that meets the requirements of the State Building Code.
(B) Dimensional requirements. Not be less than 30 feet in length and not less than 22 feet in width over that entire minimum length. Width measurements shall not take into account overhangs and other projections beyond the principal walls. Dwellings shall also meet the minimum floor area requirements as set out in this chapter.
(C) Roof. Composition, metal, shingled or tiled roof.
(D) Building permit.
(1) The application for a building permit, in addition to other information required, shall indicate the height, size, design and the appearance of all elevations of the proposed building and a description of the construction materials proposed to be used and the delineation of future deck, porch and/or garage additions whether or not the construction is intended.
(2) The exterior architectural design of a proposed dwelling may not be so at variance with, nor so similar to, the exterior architectural design of any structure or structures already constructed or in the course of construction in the immediate neighborhood, nor so at variance with the character of the surrounding neighborhood as to adversely affect the public health, safety or general welfare.
(3) The requirements of the State Building Code or the applicable manufactured housing code shall be met.
(E) Three stall garage. For lots of record in the RE and R-1 Districts established after the effective date of this chapter, all site plans for single-family homes shall provide for the location of a three-stall garage, whether or not construction is intended, in conformance with all provisions of this chapter.
(Prior Code, § 11-17-9) (Ord. 258, passed 5-4-2006; Ord. 270, passed 3-15-2007)