(a) Lot and Building Requirements. The following lot and building requirements are minimum standards, except where noted, and shall apply in the Multi-Family Residential Districts (MF-A and MF-C):
(1) Lot Area (minimum): Fifteen thousand (15,000) square feet.
(2) Lot Coverage (maximum): Thirty-five (35) percent.
(3) Lot Width: Eighty (80) feet of frontage on an improved public right-of-way.
(4) Lot Width on a Curving Street or Cul-De-Sac: Forth-five (45) feet of frontage on an improved public right-of-way and lot width shall be eighty (80) feet at the minimum building line.
(5) Front Yard Setback: Twenty-five (25) feet as measured between the street right-of-way line and the building setback line.
(6) Side Yard Setback: Ten (10) feet; for a Conditional Use, the side yard setback shall be fifteen (15) feet.
(7) Rear Yard Setback: Twenty-five (25) feet as measured from the rear property line; an accessory building may be located in the rear yard no less than eight (8) feet from the rear property line.
(8) Dwelling Dimensions: The following dwelling dimensions measured in terms of square footage shall apply to all residential dwellings in the Multi-Family Residential Districts:
DWELLING TYPE | FINISHED FLOOR AREA |
One Bedroom | 1,000 square feet |
Each Additional Bedroom | 225 square feet |
(b) Supplemental Standards. The following supplemental standards shall apply within the Multi-Family Residential Districts (MF-A and MF-C):
(1) No building shall exceed thirty-five (35) feet in height, nor more than two and one half (2 ½) stories in height.
(2) Applicable standards shall be met in corresponding sections of this Zoning Code.
(3) Two (2) or more multiple-unit structures located on the same lot shall locate no closer than twenty (10) feet to each structure.
(4) One (1) covered parking space may be provided per dwelling unit in clusters not to exceed six (6) spaces.
(Ord. 25-09. Passed 5-4-09.)