(a) Lot and Building Requirements. The following lot and building requirements are minimum standards, except where noted, and shall apply in the Low Density Residential District (R-3):
(1) Lot area: Fourteen thousand three hundred and seventy five (14,375) square feet.
(2) Lot coverage (maximum): Thirty (30) percent.
(3) Lot width: Eighty (80) feet of frontage on an improved public right-of- way.
(4) Lot width on a curving street or cul-de-sac: Forty-five (45) feet of frontage on an improved public right-of-way and lot width shall be eighty (80) feet at the minimum building line.
(5) Front yard setback: Thirty (30) feet as measured between the street right- of-way line and the building setback line.
(6) Side yard setback: Ten feet on each side as measured from the side property line.
(7) Rear yard setback: Thirty (30) feet as measured from the rear property line. Accessory building may be located in the rear yard no less than eight (8) feet from the rear property line.
(8) Dwelling dimensions: The following dwelling dimensions measured in terms of square footage shall apply to all residential dwellings in the R-3 district:
DWELLING TYPE | GROUND FLOOR AREA (square feet) | FINISHED FLOOR AREA (square feet) |
Two-story | 950 | 1,900 |
One-and-a-Half-Story | 1,250 | 1,700 |
One-Story | 1,500 | 1,500 |
Split Level | 1,500 | 1,500 |
(b) Supplemental Standards. The following supplemental standards shall apply within the Low Density Residential District (R-3):
(1) No building shall exceed thirty-five (35) feet in height, nor more than two (2) stories in height.
(2) Any building with a height in excess of one and one-half (1½) stories or twenty (20) feet shall have a basement.
(3) Applicable standards shall be met in corresponding sections of this Zoning Code.
(Ord. 41-01. Passed 8-20-01.)