(a) Lot and Building Requirements. The following lot and building requirements are minimum standards, except where noted, and shall apply in the Limited Density Residential District (R-1):
(1) Lot area: Twenty-five-thousand (25,000) square feet.
(2) Lot coverage (maximum): Thirty (30) percent.
(3) Lot width: One-hundred (100) feet of frontage on an improved public right- of-way.
(4) Lot width on a curving street or cul-de-sac: Sixty (60) feet of frontage on an improved public right-of-way and lot width shall be one-hundred (100) feet at the minimum building line.
(5) Front yard setback: Sixty (60) feet as measured between the street right-of- way line and the building setback line.
(6) Side yard setback: Fifteen (15) feet on each side as measured from the side property line.
(7) Rear yard setback: Forty (40) feet as measured from the rear property line; an accessory building may be located in the rear yard no less than eight (8) feet from the rear property line.
(8) Dwelling dimensions: The following dwelling dimensions measured in terms of square footage apply to all residential structures:
DWELLING TYPE | GROUND FLOOR AREA (square feet) | FINISHED FLOOR AREA (square feet) |
Two-story | 1,100 | 2,200 |
One-and-a-Half- Story | 1,400 | 2,000 |
One-Story | 1,800 | 1,800 |
Split Level | 1,800 | 1,800 |
(b) Supplemental Standards. The following supplemental standards shall apply within the Limited Density Residential District (R-1):
(1) No building shall exceed thirty-five (35) feet in height, nor more than two (2) stories in height.
(2) Any building with a height in excess of one and one-half (1 ½ ) stories or twenty (20) feet shall have a basement.
(3) Applicable standards shall be met in corresponding sections of this Zoning Code.
(Ord. 41-01. Passed 8-20-01.)