Loading...
The volume of flow used for computing the industrial waste collection and treatment charge shall be the metered water consumption of the wastewater system user as shown in the records of meter readings maintained by the owner except as noted in § 51.096.
(Ord. 130, passed 5-19-1992)
In the event that a wastewater system user discharging industrial waste in the public sewers produces evidence satisfactory to the village that more than 10% of the total annual volume of water used for all purposes does not reach the public sewer, then the determination of the water consumption to be used in computing the waste volume discharged into the public sewer may be made a matter of agreement between the village and the wastewater system user.
(Ord. 130, passed 5-19-1992)
(A) (1) Devices for measuring the volume of waste discharged may be required by the village if this volume cannot otherwise be determined. Metering devices for determining the volume of waste shall be installed, owned and maintained by the wastewater system user discharging the waste.
(2) Following approval and installation, such meters may not be removed without the consent of the village.
(B) (1) Samples shall be collected in such a manner as to be representative of the composition of the wastes.
(2) The sampling may be accomplished either manually or by the use of mechanical equipment acceptable to the village.
(C) (1) Installation, operation and maintenance of the sampling facilities shall be the responsibility of the wastewater system user discharging the waste and shall be subject to the approval of the village. Access to sampling locations shall be granted to the village or its duly authorized representatives at all times.
(2) Every care shall be exercised in the collection of samples to ensure their preservation in a state comparable to that at the time the sample was taken.
(Ord. 130, passed 5-19-1992)
Loading...