The following regulations shall govern the design and layout of lots:
(a) Each lot shall front on a public or private street except as otherwise permitted for planned unit residential developments.
(b) Lot arrangement and design shall be properly related to the topography and to the character of surrounding development to provide desirable and appropriate building sites.
(c) All lots shall conform to or exceed the requirements of these Subdivisions Regulations and the zoning district requirements for the district in which they are located and the use for which they are intended.
(d) Lots with double frontage shall be avoided except where the Commission determines that it is essential to provide for the separation of a residential development from arterial streets to overcome a specific disadvantage due to orientation or topography.
(e) All side lines of lots shall be at right angles to straight street lines and radial to curved street lines except where the Planning Commission determines that a variation of this rule will provide a better street and lot layout.
(f) Lots shall follow the City boundary lines, whenever practical, rather than cross them.
(g) No lot shall have a depth of less than 100 feet or of more than three (3) times its width.
(h) Lots shall be numbered in accordance with the unified number system as set forth in Chapter 1335 of the Building Code.
(i) All new lots shall be connected to the City water and wastewater system.
(j) Lots intended for use other than residential purposes shall be specifically designed for such purposes and shall have adequate provision for off-street parking, setbacks, loading and unloading areas.
(Ord. 62-2023. Passed 1-16-24.)