(A) Stone survey marker monuments with metal caps shall be set at all street corners. Angle points and all points of curve in each public street shall be monumented per 2.10.3 below.
(B) Each survey marker shall be set with the top between six and 12 inches above the finished grade except that the top shall be flush with the finished grade wherever it is located in an area to be plowed for removal of snow or is to be pavement, lawn, or a decorative planting area.
(C) The preferred material for all monuments shall be rebar five-eighths inch in diameter. Alternate acceptable materials for monuments shall be iron pipe five-eighths inch in diameter and stone shafts (with metal caps) four inches square.
(D) All monuments are to be not less than 36 inches in total length unless they are drilled at least three inches into solid ledge or rock.
(E) All monuments shall have the surveyor’s identification suitably attached.
(2011 Code, § 154.24) (Ord. 2007-02, passed 3-5-2007) Penalty, see § 10.99