1474.03 PERMIT REQUIRED; EXCEPTION; TARPING AND CLEAN-UP OF DEBRIS REQUIRED.

   (a)   No person shall abrasively clean, remove, or strip paint from the exterior surface of any structure by:

      (1)   Abrasive cleaning or stripping; or

      (2)   Any other process, including heat guns, scraping or power sanding, where paint is being removed from more than twenty-five percent of any exterior wall surface of a structure without first obtaining a permit from the Building Inspector. A separate permit is required for each separate job or location.

   (b)   A contractor acting under a contract with the Village does not need to obtain a permit, but shall comply with all requirements of a permit holder.

(1974 Code § 115.02)

   (c)   Any paint remover described in Section 1474.02 shall tarp and thoroughly clean up any debris, as specified in Section 1474.06.