(A) Permitted use. Roof mounted solar energy systems adhering to the performance and design standards of this subchapter are permitted in all zoning districts.
(B) Conditionally permitted. Ground mounted solar energy systems having a combined faceplate capacity of less than 500 kW AC or less shall be conditionally permitted in all zoning districts and shall meet all accessory use/accessory building requirements of Supplementary Regulations, § 153.019. Commercial solar energy systems having a combined faceplate capacity of 500 kW AC or more shall be a conditionally permitted use in I-1 and I-2 zoning districts and shall meet all accessory use/accessory building requirements of Supplementary Regulations, § 153.019.
(C) Performance and design standards.
(1) Location. No portion of any roof mounted solar energy system may extend below the roof line.
(2) Height. Roof mounted solar energy systems shall be either integrated into the roof layer or a separate flush mounted panel attached to the roof surface and shall not project vertically if installed on a pitched roof. The use of standard, low profile mounting hardware required to attach panels to a roof surface shall not be considered a projection. Panels or tubing installed on flat roofs may project vertically if not visible from any street.
(3) Appearance.
(a) All roof mounted solar panels must have a non-reflective coating to minimize glare.
(b) Roof mounted installations must be uniform in appearance and color.
(c) All mounting brackets and related structural supports shall not extend more than three inches above the roof surface and shall be covered in a manner architecturally compatible with the building.
(d) All wires and other associated appurtenances related to a solar energy system shall be installed below the roof line, in a secure location.
(e) All solar energy systems shall have grid failure disconnection systems and shall adhere to R.C. § 4928.67 and UL 1741, Standard for Utility-Interactive Applications.
(f) All ground mounted solar energy system installations will be enclosed in fencing six feet in height in compliance with Supplementary Regulations, § 153.019(U), Fences, walls, and hedges.
(Ord. 12-2016, passed 4-18-2016)