§ 20.262.040 WALL DESIGN STANDARDS.
   The following design standards shall apply to the construction of a perimeter wall in the WD Wall Design Overlay Zone:
   A.   The wall shall have a minimum setback of six (6) inches from the public sidewalk along the street. The final wall setback for any specific lot shall be subject to the review and approval of the City Planner.
   B.   The wall height shall range from a minimum height of six (6) feet to a maximum height of eight (8) feet, as measured from the highest adjacent grade. The final wall height for any specific lot shall be determined through the plan check process, shall be coordinated with adjacent properties, and shall be subject to review and approval of the City Planner.
   C.   The wall shall be constructed of eight (8)- inch by six (6)-inch by sixteen (16)-inch slumpstone block, tan in color (Please see Exhibit 1 in the Appendix following this chapter).
   D.   There shall be one pilaster treatment with design specifications included in the wall design for each property (Please see Exhibit 2 in the Appendix following this chapter). The placement of said pilaster treatment shall be coordinated to complement adjacent properties, and shall be subject to the review and approval of the City Planner.
   E.   The wall shall include a slumpstone wall cap treatment with design specifications (Please see Exhibit 3 in the Appendix following this chapter).
(Ord. 1104, passed 6-19-07)